3"(80mm) Submersible Motor
3” Submersible motor suitable for 3” bore well pump, and operate with permanent split capacitor. Submersible motors are maintenance-free operation, and provides a long life for your submersible pump operation.
Product features of Submersible Motor :
Stainless steel outer shell and shaft.
Maintenance free lubricated ball bearings.
Rotation: Counter clock wise.
Vertical & horizontal mounting position.
Submersible Motor with high efficiency electrical design.
(lower operating cost, Lower winding temperature).
Cooling & lubrication by non toxic fluid.
Submersible Motor for permanent split capacitor.
Pressure compensation diaphragm.
Continuous duty.
Specification of Submersible Motor :
Degree of protection : IP 68.
Insulation class of submersible motor : F.
Ambient temp. : 45°C.
Minimum Cooling flow along the Submersible motor : 8cm/sec.
Water PH of submersible motor: 6.5 - 8.0.
Maximum no. Starts per hour : 30.
Maximum submerged depth : 350 mts.
Ratings : Single phase 0.37 KW - 0.75KW.
Voltages : Single phase 230V +5%, -15% - 50Hz.
Thrust load : 1000 N.
Standard motor cable : Suitable for operation in drinking water. 1 X 1.5mm² X 3mts.
Submersible Motor protection : Select thermal overload protection with trip time < 10 sec. at 5xIn.
Special voltages, execution and material versions available on customer's request.
Techinical Data
3" Submersible Motor Technical data for H3 series
|
