Centrifugal Monoblock MDH Pumps
"LUBI" brand single phase Monoblock pumpsets are manufactured in reference to IS : 9079 and motoro with reference IS : 996 & IEC 34 - 1. Special care and quality conterol measures are adopted to give efficient and reliable operation for years. special features are outlined below.
Application
Residential Bunglows.
Community Water Supply.
Construction Sites.
Apartments.
Samll Farms.
Lawns & Gardens.
Car Washing.
Sprinklers
Hotels & Hospitals
Salient Features
The laminations are non - oriented silicon steel & confirms to IS - 648.
Volute, Impeller, Adaptor, Stator body, Endshield is made of close grained cast iron of high tensile strength and has a very smooth surface finish resultig in low friction losses.
Motor windings are vaccum imperegnated with synthetic vernish for better monisture resistance.
Superior mechanical shaft seal for longer life and effective sealing against water leakage.
The electric rotor is pressure die cast & uses electric wrade aluminium.
Grease Labricated anti - friction ball bearings are fitted at both ends to withstand radial and axial loads.
Better insulating materials are used so that pumpset can with stand high temperature rise.
All components are manufactured from materials as per standard specifications.
They are precisely machined on modern machins tools to give you years of reliable operation.
Standard Motor
The motor is totally enclosed and fan cooled (TEFC).
Motor with specification of IS : 996 & IEC : 34 - 1.
Class 'B' insulation is used.
The stainless steel shaft is ground finished.
The motor are of the capacitor Start & Run (CS & R) desing giveing high starting torque.
2 - Pole induction motor.
Input supply condition is single phase - 230V, Three Phase 415 (50Hz).
Voltage Range 170V - 240V (Single Phase), 300V - 415V (Three Phase).
Techinical Data
Centrifugal Monoblock 2900 RPM For MDH Pumps
|
