Drainage Pumps LAP
Application
Waste water.Sump drainage.
Flood control.
Dewatering for fish pond or basement.
Performance Range
Head range up to 20 meters.
Flow range up to 900 l/min. (54 m³/h).
Features
New design for light weight, elegant shape with best quality.
Unfastening the bolts between the oil casing and the upper pump casing allows the body
to be separated for easy maintenance.
The smallest pump in the range is the LAP 2015 / 2035, which is an extremely practical
pump, has a low temperature oil filled motor and single seal design.
Pump for 2HP or higher are furnished with dual Mechanical seal. Silicon carbide at the
water end and carbon ceramic at the motor end.
Thermal overload protector
Equipped with Automatic
reset motor protector,
prevents motor from
burning due to high
temperature/phase failure/ voltage drop and lock
impeller.
Cable base
Epoxy resin seal cable
base to prevent water
intrusion into motor through
the cable wire.
U Type Impeller
This impeller can generate rapid rotating vortex to handle fluid mixed with long fiber, the majority of abrasive solids do not touch impeller to minimize impeller wear.
Float Switch
SExcellent quality float switch Provided with epoxy resin sealed connector.
Float Switch Pump
The pumps are equipped with wide angle on/off level control float switch for easy and
simple automatic operation.
Applications : Slushy water, construction site, Dewatering, Drainage application.
Type : ½ ~ 1 HP Single-phase pumps.
Motor
2 - pole submersible motor 50Hz (n = 2900 RPM).
Single phase :230V +5 - 15 %
Three phase :400V +5 -15 %
Protection IP 68
Insulation class : B
Operating Conditions
Liquid temperature up to 40°.
Ambient temperature up to 50°.
Max.Starts per hour : 30 at regular intervals.
Continuous duty.
Special Features on Request
Other voltages.
Available in 60Hz.
Techinical Data
Drainage Pumps 2900 RPM For LAP
|
