Side Suction Peripheral MPS Pumps
Application
For clean liquids without abrasives, which are non - aggressive for the pump materials.
(Solids content up to 0.2 %)
For water supply.
For heating, cooling, air-conditioning and circulation plants.
For civil and industrial applications.
For pressure boosting.
For watering gardens.
Performance Range
Head range up to 40 meters.
Flow range up to 45 l/min. (2.7 m³/h).
Motor
2 - pole submersible motor 50Hz (n = 2900 RPM)
Single phase : 230V +5 -15 % with thremal protection.
Insulation class F
Protection IP 44
Constructed in accordance with IEC 34.
Operating conditions
Liquid temperature up to 90°C.
Ambient temperature up to 50°C.
Maximum suction lift up to 9 m.
Continuous duty.
This pump is supplied with a check valve on the suction side, so no foot valve is required.
Special Features on Request
Other voltages.
Available in three phase.
Special mechanical seal.
Higher liquid or ambient temperatures.
Available in 60Hz.
Material
COMPONENTS |
MI |
B - MI |
Pump Casing & Bracket |
Grey Iron 200 ISO 185 |
Bronze G CuSn10UNI 7013 |
Impller |
Brass |
Brass |
Shaft |
Cr Ni Steel AISI 410 |
Cr Ni Steel AISI 410 |
Mechanical Seal |
Graphite vs Ceramic |
Graphite vs Ceramic |
Techinical Data
Side Suction Peripheral 2900 RPM For MPS Pumps
|
