ArabicEnglishFrenchPortugueseSpanish

Submersible Motor 60 Hz

Lubi Brand Submersible Motor is manufactured in ISO 9001 design with NEMA Standard. Submersible motor is available in Cast Iron, SS 304 & SS 316 construction. Submersible motors are built using advanced technology and components of superior quality that they ensure good mechanical strength and excellent electrical reliability. Submersible Motors are available in 50 as well as 60 Hz. Premium motors are the choice for dependable, maintenance-free operation and provide a long life for your submersible pump operation. Lubi Offers Submersible motor from 3” to 4” oil filled and from 3” to 10” water filled up to 250 HP.

  • Water supply
  • Irrigation
  • Civil
  • Industrial
  • Fire fighting

 3”, 4” & 6” Oil filled submersible motor.

  •   Completely rewindable.
  •   Cooling and lubrication by non toxic fluid.
  •   Stainless steel outer shell and shaft.
  •   Maintenance free lubricated ball bearings.
  •   Mechanical shaft seal (Carbon/Ceramic) provided.
  •   High efficiency electrical design (lower operating cost).
  •   Tropicalized design (lower winding temperature).
  •   Single phase motors are permanent split capacitor motors.
  •   All single phase motors will require control box.
  •   NEMA coupling flange.
  •   Pressure compensation diaphragm

4” & 6” Water filled submersible motor.

  • Easily rewindable (wet wound) induction motor with PE insulated windings.
  • Corrosion resistant stainless steel stator jacket and shaft.
  • Water lubricated radial and axial thrust bearings.
  • Counter thrust bearing.
  • Motors are pre-filled with clean water + Glycol mixture.
  • High efficiency electrical design (lower operating cost).
  • Tropicalized design (lower winding temperature).
  • 4” Single phase motors are capacitor start and run design.
  • All 4” single phase motors will require control box.
  • Pressure compensation diaphragm
  • NEMA coupling flange.

4″ & 6” Water filled stainless steel submersible motor.

  • Easily rewindable (wet wound) induction motor with PE insulated windings.
  • Completely stainless steel AISI 304 construction.
  • Water lubricated radial and axial thrust bearings.
  • Counter thrust bearing.
  • Motors are pre-filled with clean water + Glycol  mixture.
  • Shaft extension made of stainless steel AISI 316.
  • High efficiency electrical design (lower operating cost).
  • Tropicalized design (lower winding temperature).
  • 4” Single phase motors are capacitor start and run design.
  • All 4”  single phase motors will require control box.
  • 6″ NEMA coupling flange.
  • Pressure compensation diaphragm

 6″ , 8” & 10” Water filled heavy duty submersible motor.

  • Easily rewindable (wet wound) induction  motor with PE insulated windings.
  • Corrosion resistant stainless steel stator jacket and shaft.
  • Water lubricated heavy duty radial and axial thrust bearings.
  • Counter thrust bearing.
  • Motors are pre-filled with clean water + Glycol mixture.
  • High efficiency electrical design (lower operating cost).
  • Tropicalized design (lower winding temperature).
  • NEMA coupling flange.
  • Pressure compensation diaphragm.
Download Catalogue:

Submersible_Motor_50HZ


Inside our features
Global Languages
Drop in here
Near Kalyan Mills, Naroda Road, Ahmedabad – 380 025 INDIA.
+91-79-30610100
+91-79-30610300

© 2014 Lubi Industries LLP.
Powered by: NicheTech.